AlphaTRAK Blood Glucose Monitor Control Solution allows you to perform quality control tests in order to ensure that the AlphaTRAK Blood Glucose Monitoring System is working properly and that you can rely on the test results. For detailed instructions on how to perform a control solution test, please refer to the User Guide. The control solution contains a fixed amount of glucose.
Each bottle containing 4.0 ml AlphaTRAK Glucose Control Solution contains:
A Control solution test should be performed:
In order to perform a control solution test, you need an AlphaTRAK Meter, AlphaTRAK Test Strips, and AlphaTRAK Control Solution. A control solution test follows exactly the same procedures as a test with a drop of blood. Shake the control solution well before each use. Gently touch one edge of the test strip to the control solution. Make sure that the control solution test result is within the range printed on the test strip vial. If the test result is within the range printed on the test strip vial, your meter and test strips are working properly.
If the test result is not within the range printed on the test strip vial:
Performance Characteristics:
The performance of the AlphaTRAK Test Strips has been tested both in laboratory and clinical studies. The testing range of the AlphaTRAK Blood Glucose Monitoring System is 20 mg/dL to 500 mg/dL.
Accuracy:
The accuracy of the AlphaTRAK Blood Glucose Monitoring System has been demonstrated by comparison of measured blood glucose test results to those obtained from a reference laboratory.
Warning:
Always store the control solution at room temperature. Do not freeze. The control solution can be used for up to 3 months of first opening the bottle or until the expiration date, whichever comes first. Replace the cap on the control solutions bottle and close tightly immediately after use. Do not dilute the control solution with water or any other liquid. Do not take internally. If swallowed, seek medical advice immediately.
Additional information not available for this medicine.